[sgroup] QD drive repair

Sweetsynthchuck sweetsynthchuck at yahoo.com
Sun Sep 15 07:28:59 EDT 2013


i could not find any videos  or really any information about what to do, 

however i guess i will have to open her up and take a peak,

out of interest if i cannot get her fixed up is there any librarians for any of the s series samplers with QD?


 From: Pete Hartman <pete.hartman at gmail.com>
To: Sweetsynthchuck <sweetsynthchuck at yahoo.com> 
Cc: "sgroup at sgroup.ca" <sgroup at sgroup.ca> 
Sent: Friday, September 13, 2013 3:49 AM
Subject: Re: [sgroup] QD drive repair

Most likely the belt is goo.

I repaired an S-10 QD last summer with one of these: FBS9.0 Flat Belt,
Small 9.0 Inch from AVCR Electronics.


You'll want to google for some instructions/videos on taking the drive
apart, it's not terribly hard, but needs care to put things back in
the right places/order.

Good luck!

On Thu, Sep 12, 2013 at 6:14 PM, Sweetsynthchuck
<sweetsynthchuck at yahoo.com> wrote:
> Hi list,
> Any advice on repairing my qd drive?
> The disks when inserted, i hear the drive make a constant noise but the actual qd does not get latched and i dont hear it spin, any advice to allow me to get her back up and running?
> Thanks
> _______________________________________________
> Sent by the sgroup mailing list
> sgroup at sgroup.ca
> For subscribe/unsubscribe: http://lists.sgroup.ca/mailman/listinfo/sgroup
> See http://www.generalconcepts.com/sgroup/ for more information.

More information about the sgroup mailing list